How do you make soy pillar candles? - soy pillar candles
I had to do a project Skool (I'm in highschool, and it is to do a group project with four other people in my class)
Saturday, January 2, 2010
Soy Pillar Candles How Do You Make Soy Pillar Candles?
1 comment:
Melt the wax. Place the wax in a bain-marie. Use medium heat and stir until completely melted wax.
#
Preparing the form. It is better to have a metal mold seamless use. There should be a hole in the ground, which is small enough, the wick can happen.
*
Cut with parts from a standard set by the wick, the wick is twice as large as the height of the candle.
*
Run the cable into the black piece of sponge and washing machine.
*
Make a tight knot in the cord knots on the puck. This prevents the execution of wax from the hole in the mold.
*
Running for the rest of the wick through the hole in the bottom of the form.
*
Place around the hole in the center of the bolt.
*
Tighten the wick.
*
Adjust the wick at the bar next to the wick.
#
Add the pieces of wax. Add the pieces of wax to help retain, add the wax and color. You can use any color.
*
When the wax cools it contracts, the shootingg, until the wax sheets, it helps to prevent shrinkage. The chips are to be regarded as beautiful as a decoration on each candle.
* If you do not cut the old candles that have burned, you can use these links - into small pieces. Make sure no cables or the manufacture of small parts in them, etc.
#
Add color and flavor. Only the use of oils for the manufacture of candles - essential oils that are specifically for candles safest. Use 1 / 8 cup (30 ml) of fragrance oil for an average size of the sail.
*
Stir in chips, color and aroma of the oil until completely mixed
#
The casting wax. After pouring the wax.
#
From 24 hours to cool. When the wax contracts, then you can fill more wax to the chops.
#
Remove the mold. Cut the wick on the exposed side, which is really the end of the candle. In fact, it is better to trim the wick before the wax is completely hardened. This is called the scissors in the wax can ask, what is hidden under the wick, the wax, a flat rate.
*
Cut offers the top of the wick above the black sponge and washing machine space for them. Be careful not to reduce too much, because it is the end you will come to light. You can always trim a little more than necessary.
*
Remove the mold.
Post a Comment